1. <table id="s6qli"></table>

        <td id="s6qli"></td>

        全國服務熱線:

        15853163650
        您當前的位置:首頁 > 新聞動態 > 公司動態
          聯系我們

          CONTACTS US

          濟南皓暉建材有限公司,總部位于中國泉城——山東濟南,是一家專業生產銷售石塑電梯門套,仿大理石電梯門套的專業廠家。皓暉建材在電梯門套生產行業很多年,憑著優質的產品質量和完善的售后服務,在全國各地都有我們的工程案例。

          我們本著“以質量求生存 ,靠管理出效益,憑信譽贏口碑,以實干筑輝煌”的經營理念,公司將立足于當代建材現代化發展前沿,依靠科技、勇于探索,以優質產品優良服務、信譽與廣大用戶攜手共創輝煌。

          聯系電話: 15853163650

          工廠地址:山東濟南章丘區(歡迎廣大客戶來廠勘察)

        公司動態

        COMPANY NEWS

        安裝仿大理石uv板有哪幾種

        2016-10-10 13:31:43 文章來源:www.annexegallery.com

          仿大理石uv裝飾板作為新型裝飾材料,在市場上的認知度還是很高的,下面仿大理石uv板廠家給大家介紹一下:
        Imitation marble UV decorative plate as a new type of decorative materials, in the market awareness is still very high, the following imitation marble UV board manufacturers to introduce you:
        一、鋁合金固定
        Aluminum alloy fixed
        1、先要在墻面上覆上一面基層,常用的是3MM的三合板,木工板,好點是防火玻鎂板,用氣釘把它們釘在墻面上。
        1, first in the wall to cover a basic level, is commonly used in 3MM three plywood, wood board, good point is fire glass magnesium board, with gas nails they nailed on the wall.
        2、再在墻面上釘腳線。用鋁合金陰角固定墻角、再用鋁合金工具條固定墻角。也就是分別把鋁合金陰角和鋁合金工具條分別用釘子釘在墻面的相應位置。
        2, and then nail the foot line on the wall. With aluminum alloy corner fixed corner, and then fixed corner of aluminum alloy tools. That is, respectively, the aluminum alloy and aluminum alloy tool bar with a nail in the wall of the corresponding position.
        3、再就是鋸UV板。將UV板按實際要求尺寸鋸成一塊一塊的,再將鋸邊用沙紙修整平整和干凈。
        3, and then saw UV board. The UV board according to the actual requirements of the size of sawing a piece, then sawing with sandpaper smooth and clean dressing.
        4、再將UV板嵌入鋁合金陰角和工具條之間就行了。
        4, and then UV plate embedded in the negative angle and the tool bar between the.
        二、用墻面膠安裝
        Two, with wall plastic installation
        1、先要在墻面上覆上一面基層,常用的是3MM的三合板,木工板,好點是防火玻鎂板。用氣釘把它們釘在墻面上,并用沙紙將板面清潔干凈。
        1, the first to be covered on the wall of the grass, the commonly used 3MM three plywood, wood panels, good point is the fire glass magnesium board. Gas nail nail them on the wall, and the clean surface with sandpaper.
        2、鋸板,將UV板安實際要求鋸成一塊塊的。
        2, saw plate, UV plate of an actual requirement of sawn pieces.
        3、倒邊,將要安裝的UV板四邊用倒邊機倒成45度角。根據實際安裝要求,有的只需倒上下兩邊或是三個邊。
        3, the reverse side, will be installed on the side of the UV board with the inverted edge machine down to 45 degrees. According to the actual installation requirements, and some only need to fall on either side or three sides.
        4、清潔UV板背面,用沙紙和抹布將UV板背面清潔干凈。
        4, clean the UV plate with sandpaper and back cloth to clean the board back UV.
        5、將萬能膠或木工膠均勻涂在UV板背面,然后將UV板平整地貼在墻面上,再用手輕輕捶打UV板,讓UV板好好牢固粘在墻面上。
        5, the adhesive or wood glue evenly coated on the UV plate on the back, and then UV plate smoothly on the wall, then gently beat the UV board, UV board to let firmly stick on the wall.
        6、調水性填縫料,然后將填縫料填在兩張UV板45度角相交處,先填滿,再用木板垂直角從45度角相交處輕輕劃過,這樣45度相交處就好看了。
        6, water filling material, then fill in the filler two UV in a 45 degree angle at the intersection, fill, and board vertical angle from 45 degrees angle intersection gently across 45 degrees at the intersection, so good.
        7、清潔UV板表面,將多余的填縫料清潔干凈。
        7, clean the surface of the UV board, the excess sealant clean.
        相信看了上面的介紹,您定會心動,要了解更多的仿大理石uv板內容,歡迎您進店或電話咨詢更多信息,期待您的到來。
        I believe that the introduction of the above, you will be moved, to learn more about the imitation marble UV board content, you are welcome to enter the shop or telephone for more information, look forward to your arrival.
        毛片精品一区二区二区三区
        1. <table id="s6qli"></table>

            <td id="s6qli"></td>