1. <table id="s6qli"></table>

        <td id="s6qli"></td>

        全國服務熱線:

        15853163650
        您當前的位置:首頁 > 新聞動態 > 公司動態
          聯系我們

          CONTACTS US

          濟南皓暉建材有限公司,總部位于中國泉城——山東濟南,是一家專業生產銷售石塑電梯門套,仿大理石電梯門套的專業廠家。皓暉建材在電梯門套生產行業很多年,憑著優質的產品質量和完善的售后服務,在全國各地都有我們的工程案例。

          我們本著“以質量求生存 ,靠管理出效益,憑信譽贏口碑,以實干筑輝煌”的經營理念,公司將立足于當代建材現代化發展前沿,依靠科技、勇于探索,以優質產品優良服務、信譽與廣大用戶攜手共創輝煌。

          聯系電話: 15853163650

          工廠地址:山東濟南章丘區(歡迎廣大客戶來廠勘察)

        公司動態

        COMPANY NEWS

        電梯門套線養護劑操作標準方法

        2017-01-05 14:49:50 文章來源:www.annexegallery.com

          以烘箱或者瓦斯槍烘干電梯門套線,一些公司電梯門套線使用養護劑時為了節省成本,并沒有事先烘干電梯門套線而直接使用養護劑,以致養護效果不佳。
        In the oven drying or the gas gun lift line, some companies use elevator door line maintenance agent in order to save costs, and without prior drying lift Mentao line directly using a curing agent, so that the effect of poor maintenance.
        事實上,烘干電梯門套線實屬必要,其原因是:烘干電梯門套線可除去電梯門套線孔隙的水分,養護劑才能順利的滲透到足夠深度而具有深層的養護功能。
        In fact, it is necessary to lift the drying line, the reason is: the drying line can remove the elevator elevator door line pore water curing agent can be successfully penetrated deep enough and has deep maintenance function.
        烘干電梯門套線時應注意:瓦斯槍在電梯門套線上移動速度要控制好,如速度太快,瓦斯槍噴出的熱源傳導給電梯門套線表面的溫度不夠高,則無法有效除去電梯門套線孔隙內的水分。若瓦斯槍移動過慢,集中在某一點,則會讓電梯門套線表面溫度過高,嚴重時造成電梯門套線表面膨脹破裂。
        Should pay attention to the elevator door line: drying gas gun control in the elevator door line speed, if the speed is too fast, the heat conduction of gas gun sprayed to the surface of the elevator door line temperature is not high enough, it can not effectively remove the pore water in the elevator door line. If the gas gun moving too slow, concentrated at one point, will make the elevator door line surface temperature is too high, resulting in serious surface lift line expansion rupture.
        電梯門套線須回溫至40攝氏度才能使用養護劑,其原因是溫度過高,溶劑揮發過快,養護劑提早在電梯門套線表面硬化,導致滲透深度不夠,養護劑的深層養護效果很差,水斑物質即可滲到目視范圍之內。
        The elevator door line should be back to the temperature to 40 degrees Celsius in order to use the curing agent, the temperature is too high, too fast solvent evaporation, curing agent on the surface of the elevator door line early hardening, resulting in penetration depth is not enough deep curing effect curing agent is poor, water can seep into the spot material within visual range.
        使用適量的養護劑,使用養護劑的量一定要足夠,否則電梯門套線吸收不夠,無法產生養護效果。
        Use appropriate amount of curing agent, curing agent with the amount must be sufficient, otherwise the lift line absorption is not enough, can not produce the effect of maintenance.
        以毛刷涂抹均勻,使養護劑能很均勻滲透電梯門套線表面的每一點,以避免發生局部使用量大,養護強,局部卻使用量不足,發生病變因素浸入的狀態。
        With the brush evenly, the curing agent can be uniformly surface lift Mentao line every point, to avoid local usage and maintenance, but local usage, disease factors immersion state.
        以趕緊抹布擦拭殘余的養護劑,避免殘余養護劑才電梯門套線表面硬化,破壞電梯門套線表面光澤度。
        In order to quickly dishcloth residual curing agent, curing agent to avoid residual lift line surface hardening, damage the surface gloss of elevator door line.
        靜之保養24小時,才可以進行工程,養護劑若尚未完成硬化,其養護效果不佳,可能導致養護失敗。
        Maintenance of static 24 hours before the project can be carried out, curing agent, if not yet completed hardening, its poor maintenance, may lead to maintenance failure.
        上面講解的便是關于我公司產品的相關信息,希望您滿意小編的講解。我們用滿腔的熱情、無限的激情對待工作和客戶,我們愿意用勤奮的努力和您一起共鑄美好明天!
        The above is about the company's products on the relevant information, I hope you satisfied with the small series of explanations. We are filled with enthusiasm and passion towards work and customers, we are willing to use the hard work and you create a better tomorrow!
        毛片精品一区二区二区三区
        1. <table id="s6qli"></table>

            <td id="s6qli"></td>